cara mengetahui harga dari sebuah blog atau website

Selamat siang sobat sekalian semoga diberikan kesehatan selalu ya… amiin. Masih bersama gistechindo, demi mengisi kekosongan dari kesibukan ane putuskan untuk bikin postingan ini mungkin postingan ini udah banyak bertebaran didunia maya (internet). Tetapi tidak masalah ane hanya mengulas beberapa saja dari sekian bayaknya postingan yang sudah bertebaran…

Kali ini ane akan membagikan tips bagaimana cara untuk mengetahui harga dari sebuah blog atau website dengan mengetahui harga dari web atau blog kita tersebut berarti jeripayah kita dalam mengelolah website atau blog kita ada timbal baliknya. Sebagai jeripayah kita yang sudah mengelolah blog atau website tentu kita harus tahu berapa harga blog atau website pada saat ini, dengan begini sebagai patokan atau tolak ukur berapa harga blog atau website yang kita kelola ataupun punya orang jika sobat berminat membeli website atau blog tersebut.

Namun dalam hal ini ane tidak akan membahas mengenai membeli website atau blog tetapi hanya cara mengecek atau mengetahui saja. Dalam hal ini banyak website yang menawarkan untuk mengecek harga website atau blog, namun disini ane akan mengambil sample dari sekian banyaknya web  hanya beberapa saja.

Berikut ini daftar dari web yang menyediakan layanan cek harga web atau blog langsung saja ya..

Cekidot… 

• Mysitecost.com

Mysitecost.com merupakan situs yang menyadiakan layanan untuk mengecek harga dari sebuah web atau blog dan berikut ini merupakan cara  penggunaannya.

·         Masuklah terlebih dahulu kesitus tersebut

·         Masukan alamat domain sobat baik itu website atau bog

·         Kemudian klik tombol calculate, jika sudah akan muncul  harga dari  sebuah web atau blog yang berbentuk dalam mata uang dollar.

•  Checkwebsiteprice.com

•  Blogcalcultor.com

• Yourwebsitevalue.com

Dan satu lagi ini untuk mengetahui harga dalam bentuk rupiah

•         Bloombreg.com

Web ini menampilkan harga dalam berbetuk rupian.

Demikian postingan tentang carauntuk mengetahui harga dari sebuah blog atau website semoga bermanfaat 

Cara Pasang Website Entry Script ADF.LY Auto Refresh

Berbagi pengalaman cara memasang script dari adf.ly untuk mendapatkan hasil $$$ yang lebih efesien.... 

sebelumnya bagi agan agan yang belum punya ID adf.ly daftar dulu.. ini saya kasih linknya. KLIK AJA DISINI atau klik banner dibawah.

Get paid to share your links!

bagi agan agan yang udah punya ID adf.ly dan ingin masang Website Entry Script tapi masih bingung coba ikuti langkah langkah berikut: kali ini ane memberikan tutorial agar otomatis me refresh dalam sekian detik. cara kali ini dianjurkan bagi para publisher adf.ly.. cara ini sah dan tidak dianggap illegal oleh adf.ly , karena yang memberikan script atau metode ini adalah dari adf.ly nya sendiri... oke langsung saja bro..:

 

1. Masuklah terlebih dahulu pada akun Adf.ly sobat 

    buka adf.ly dan klik TOOLS

2. Kemudian klik Website Entry Script. dan lihat kode nya:

KODE YANG SEPERTI INI: kemudian Copy

<script type="text/javascript">
var adfly_id = XXXXXXX;
var adfly_advert = 'int';
var frequency_cap = 5;
var frequency_delay = 5;
var init_delay = 3;
</script> <script src="http://cdn.adf.ly/js/entry.js" type="text/javascript"></script>

3. setelah itu buka blogger anda. dan masuk pada template. kemudian klik Edit Html.

4. kemudian ada notice... dan klik lanjutkan setelah itu anda akan melihat html code blog anda.

5. pada html code blog anda carilah kode <head> agar lebih mudah mencarinya gunakan ctrl + F , kemudian cara <head>

6. setelah itu tambahkan script tadi dibawah kode <head>. biar gampang di paste aja, kode yang tadi udah di copy.

7. setelah itu klik save template. setelah ter save maka klik tutup.

8. begitulah cara memasang script web entry dari adf.ly 

setelah 3 detik selesai loading:

penjelasan mengenai script:

<script type="text/javascript">
var adfly_id = XXXXXXX;
var adfly_advert = 'int';
var frequency_cap = 5;
var frequency_delay = 5;
var init_delay = 3;
</script> <script src="http://cdn.adf.ly/js/entry.js" type="text/javascript"></script>

berikut adalah penjelasanya:

var frequency_cap = 5;

angka 5nya adalah berapa kali pengguna akan diarahkan ke iklan adf.ly dalam 24 jam.

var frequency_delay = 5;

angka 5nya disini berarti adalah jumlah menit antara iklan menunjukkan kepada pengguna, maka dianjurkan untuk menjaga pengaturan default.

var init_delay = 3;

Angka 3 diatas merupakan jumlah detik antara iklan yang ditampilkan dan loading website Anda. Disarankan untuk menjaga ini untuk beberapa detik sehingga pengguna akan melihat situs Web Anda terlebih dahulu dan kemudian iklan kami. Ini mengurangi kemungkinan pengguna mengklik tombol BACK.

CCNA 1 Exam Networking Answers (Chapter 11)

1. Users in the network are experiencing slow response time when doing file transfers to a remote server. What command could be issued to determine if the router has experienced any input or output errors?
• show running-config
• show startup-config
• show interfaces
• show ip route
• show version
• show memory

2. Refer to the exhibit. A technician applies the configuration in the exhibit to a clean router. To verify the configuration, the technician issues the show running-config command in the CLI session with the router. What lines should the technician expect to see in the router output from the show running-config command?
• enable password classline console 0password ccna
• enable secret ciscoenable password classline console 0password ccna
• enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0enable password classline console 0password ccna
• enable secret ciscoenable password 7 14141E0A1F17line console 0password 7 020507550A
• enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0enable password 7 14141E0A1F17line console 0password 7 020507550A

3. Refer to the exhibit. A network administrator on HostA has problems accessing the FTP server. Layer three connectivity testing was successful from HostA to the S1 interface of RouterB. Which set of commands will allow the network administrator to telnet to RouterB and run debug commands?
• RouterB(config)# enable secret class

RouterB(config)# line vty 0 4

RouterB(config-if)# login
• RouterB(config)# enable secret class

RouterB(config)# line vty 0 2

RouterB(config-vty)# password cisco

RouterB(config-vty)# login
• RouterB(config)# enable secret class

RouterB(config)# line vty 0

RouterB(config-line)# password cisco

RouterB(config-line)# login
• RouterB(config)# enable secret class

RouterB(config)# line aux 0

RouterB(config-line)# password cisco

RouterB(config-line)# login
• RouterB(config)# enable secret class

RouterB(config)# line aux 0

RouterB(config-vty)# password cisco

RouterB(config-vty)# login

4. Refer to the exhibit. The output is shown for the show ip route command executed on Router A. What does the IP address 192.168.2.2 represent?
• Gateway for the 192.168.1.0 network
• Gateway for the 192.168.3.0 network
• IP assigned to the serial port on Router A
• IP assigned to the serial port on Router B

5. What command is used to change the default router name to Fontana?
• Router# name Fontana
• Router# hostname Fontana
• Router(config)# name Fontana
• Router(config)# hostname Fontana

6. The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.)
• Sydney(config-if)# ip address 201.100.53.2 255.255.255.0
• Sydney(config-if)# no shutdown
• Sydney(config-if)# ip address 201.100.53.1 255.255.255.224
• Sydney(config-if)# clock rate 56000
• Sydney(config-if)# ip host Melbourne 201.100.53.2

7. Refer to the exhibit. What additional command is required to allow remote access to this switch?
• NA-SW1(config-if)# no shutdown
• NA-SW1(config)# enable password password
• NA-SW1(config)# ip default-gateway address
• NA-SW1(config-if)# description description

8. When network services fail, which port is most often used to access a router for management purposes?
AUX
Ethernet
• Console
Telnet
SSH

9. A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a router to manage it. Which access method should be chosen?
• Telnet
• Console
• AUX
• SSH

10. In a Cisco router, when do changes made to the running-configuration take effect?
• after a system restart
• as the commands are entered
• when logging off the system
• when the configuration is saved to the startup-configuration

11. Refer to the exhibit. Which names correctly identify the CLI mode represented by the prompt for Switch-East4#? (Choose two.)
• line configuration mode
• user executive mode
• global configuration mode
• privileged executive mode
• interface configuration mode
• enable mode

12. Which three terms correctly define the forms of help available within the Cisco IOS? (Choose three.)
• hot keys
• context-check
• context-sensitive
• structured check
• command override
• command syntax check

13. Which combination of keys would be used at the CLI prompt to interrupt a ping or traceroute process?
• Ctrl-C
• Ctrl-P
• Ctrl-R
• Ctrl-Shift-6
• Ctrl-Z

14. Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN?
• UBAMA# configure terminal
• UBAMA(config)# line vty 0 4
• UBAMA(config)# line console 0
• UBAMA(config)# interface Serial 0/0/0
• UBAMA(config)# interface FastEthernet 0/1

15. On a Cisco router, which interface would be used to make the initial configuration?
• Console Port

16. Refer to the exhibit. A student is responsible for the IP addressing, configuration and connectivity testing of the network shown in the graphic. A ping from host B to host C results in a destination unreachable but a ping from host B to host A was successful. What two reasons could account for this failure based on the graphic and partial router output for the Dallas router? (Choose two.)
• The host A is turned off.
• The Fa0/0 interface on Dallas is shutdown.
• The LAN cable is disconnected from host B.
• The S0/0/1 IP address of Dallas is improperly configured.
• The Fa0/0 interface on Dallas is in a different subnet than host B.
• The clock rate is missing on the serial link between Dallas and NYC.

The connection between routers B and C has been successfully tested. However, after rebooting router C, the administrator noticed the response time between networks 10.10.3.0 and 10.10.4.0 is slower. Ping between the two routers is successful. A trace route indicates three hops from router B to router C. What else can be done to troubleshoot the problem?
• Issue a show interfaces command on router C.

In a Cisco device, where is the IOS file stored prior to system startup?
• Flash

Refer to the exhibit. What additional command is required to allow remote access to this switch from hosts outside the local network?
a.       NA-SW1(config-if)# no shutdown
b.      NA-SW1(config)# enable password password
c.       NA-SW1(config)# ip default-gateway address 
d.      NA-SW1(config-if)# description description

Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

a.       show flash
b.      show NVRAM
c.       show startup-config
d.      show running-config
e.       show version

1. Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)

• connecting a PC to a router's console port
• connecting two routers together via their fast ethernet ports• connecting two switches together at gigabit speeds
• connecting a PC to a switch at Gigabit Ethernet speeds
• connecting two devices with the same interface type at Fast Ethernet spee

2. Which option identifies the primary interface which would be used for initial configuration of a Cisco router?
• AUX interface
• Ethernet interface
• serial interface
• console interface
3. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)
• greater distances per cable run• lower installation cost
• limited susceptibility to EMI/RFI• durable connections
• greater bandwidth potential• easily terminated

4. A network administrator is required to use media in the network that can run up to 100 meters in cable length without using repeaters. The chosen media must be inexpensive and easily installed. The installation will be in a pre-existing building with limited cabling space. Which type of media would best meet these requirements?
• STP
• UTP
• coaxial
• single-mode fiber
• multimode fiber

5. What does the term "attenuation" mean in data communication?
• loss of signal strength as distance increases• time for a signal to reach its destination
• leakage of signals from one cable pair to another
• strengthening of a signal by a networking device

6. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?
• 30
• 256
• 2046• 2048
• 4094
• 4096

7. Which subnet mask would be assigned to the network address of 192.168.32.0 to provide 254 useable host addresses per subnetwork?
• 255.255.0.0
• 255.255.255.0
• 255.255.254.0
• 255.255.248.0

8. A company is planning to subnet its network for a maximum of 27 hosts. Which subnet mask would provide the needed hosts and leave the fewest unused addresses in each subnet?
• 255.255.255.0
• 255.255.255.192
• 255.255.255.224
• 255.255.255.240
• 255.255.255.248

9. What type of network cable is used between a terminal and a console port?
• cross-over
• straight-through
• rollover• patch cable

10. Which device is used to create or divide broadcast domains?
• hub
• switch
• bridge
• router
• repeater

11. Refer to the exhibit. What destination IP address will PC1 place in the header for a packet destined for PC2?
• 192.168.1.1
• 192.168.2.1
• 192.168.2.2
• 192.168.3.1
• 192.168.3.54
12. Refer to the exhibit. Based on the IP configuration shown, what would be the result of Host A and Host B attempting to communicate outside the network segment?
• both host A and B would be successful
• host A would be successful, host B would fail
• host B would be successful, host A would fail• both Host A and B would fail

13. Which three types of connectors are commonly associated with Cisco's V.35 serial cables? (Choose three.)
• RJ 11
• DB 60
• Winchester 15 pin
• DB 9
• smart serial• RJ 45

14. Refer to the exhibit. How many subnets are required to support the network that is shown?
• 2
• 3
• 4
• 5

15. What are three common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose three.)
• direct configuration of the device• cable color code association
• cable selection and configuration
• use of cable testers to determine pinouts
• the enabling of the mechanism to electrically swap the transmit and receive pairs
• the automatic detection and negotiating of MDI/MDIX operation of the port
16. Which three statements are true about the role of routers in the network? (Choose three.)
• They propagate broadcasts.
• They enlarge collision domains.
• They segment broadcast domains.
• They interconnect different network technologies.
• Each router interface requires a separate network or subnet.• They maintain a common frame format between LAN and WAN interfaces.

17. Refer to the exhibit. A network administrator has decided to use packet capture software to evaluate all traffic from the student subnet on the way to the Internet. To ensure that all packets are captured, what network device should be used to connect the monitoring station to the network between R1 and R2?
• router
• hub
• switch
• wireless access point

18. Refer to the exhibit. Assume that all devices are using default settings. How many subnets are required to address the topology that is shown?
• 1
• 3
• 4
• 5
• 7

19. Refer to the exhibit. Which three statements are true about the exhibited topology? (Choose three.)
• Hosts B and C are in the same subnet.
• Five broadcast domains are present.
• Host B is using a crossover cable to connect to the router.• Four broadcast domains are present.
• Five networks are shown.• Host B is using a rollover cable to connect to the router.

20. To establish a console connection from a computer to a Cisco router, which cable wiring option would be used?
• crossover cable
• straight through cable
• rollover cable
• V.35 cable

21. Refer to the exhibit. Which three statements identify the type of cabling that would be used in the segments that are shown? (Choose three.)
• Segment 1 uses backbone cabling.
• Segment 1 uses a patch cable.• Segment 3 uses patch cabling.
• Segment 3 uses vertical cabling.
• Segment 3 uses horizontal cabling.
• Segment 4 uses vertical cabling.
22. Refer to the exhibit. A network technician has been allocated the 192.168.1.0/24 private IP address range for use in the network that shown in the exhibit. Which subnet mask would be used to meet the host requirements for segment A of this internetwork?
• 255.255.255.128
• 255.255.255.192
• 255.255.255.224• 255.255.255.240
• 255.255.255.248

What are two common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose two.)
-->the automatic detection and negotiating of MDI/MDIX operation of the port
--> the enabling of the mechanism to electrically swap the transmit and receive pairs

Refer to the exhibit. A student is setting up a home network primarily used for extensive file transfers, streaming video, and gaming. Which network device is best suited to these types of activities in the topology shown?
wireless access point
router
hub
* switch

CCNA 1 Exam Networking Answers (Chapter 10)

1. Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)

• connecting a PC to a router's console port
• connecting two routers together via their fast ethernet ports• connecting two switches together at gigabit speeds
• connecting a PC to a switch at Gigabit Ethernet speeds
• connecting two devices with the same interface type at Fast Ethernet spee

2. Which option identifies the primary interface which would be used for initial configuration of a Cisco router?
• AUX interface
• Ethernet interface
• serial interface
• console interface
3. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)
• greater distances per cable run• lower installation cost
• limited susceptibility to EMI/RFI• durable connections
• greater bandwidth potential• easily terminated

4. A network administrator is required to use media in the network that can run up to 100 meters in cable length without using repeaters. The chosen media must be inexpensive and easily installed. The installation will be in a pre-existing building with limited cabling space. Which type of media would best meet these requirements?
• STP
• UTP
• coaxial
• single-mode fiber
• multimode fiber

5. What does the term "attenuation" mean in data communication?
• loss of signal strength as distance increases• time for a signal to reach its destination
• leakage of signals from one cable pair to another
• strengthening of a signal by a networking device

6. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?
• 30
• 256
• 2046• 2048
• 4094
• 4096

7. Which subnet mask would be assigned to the network address of 192.168.32.0 to provide 254 useable host addresses per subnetwork?
• 255.255.0.0
• 255.255.255.0
• 255.255.254.0
• 255.255.248.0

8. A company is planning to subnet its network for a maximum of 27 hosts. Which subnet mask would provide the needed hosts and leave the fewest unused addresses in each subnet?
• 255.255.255.0
• 255.255.255.192
• 255.255.255.224
• 255.255.255.240
• 255.255.255.248

9. What type of network cable is used between a terminal and a console port?
• cross-over
• straight-through
• rollover• patch cable

10. Which device is used to create or divide broadcast domains?
• hub
• switch
• bridge
• router
• repeater

11. Refer to the exhibit. What destination IP address will PC1 place in the header for a packet destined for PC2?
• 192.168.1.1
• 192.168.2.1
• 192.168.2.2
• 192.168.3.1
• 192.168.3.54
12. Refer to the exhibit. Based on the IP configuration shown, what would be the result of Host A and Host B attempting to communicate outside the network segment?
• both host A and B would be successful
• host A would be successful, host B would fail
• host B would be successful, host A would fail• both Host A and B would fail

13. Which three types of connectors are commonly associated with Cisco's V.35 serial cables? (Choose three.)
• RJ 11
• DB 60
• Winchester 15 pin
• DB 9
• smart serial• RJ 45

14. Refer to the exhibit. How many subnets are required to support the network that is shown?
• 2
• 3
• 4
• 5

15. What are three common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose three.)
• direct configuration of the device• cable color code association
• cable selection and configuration
• use of cable testers to determine pinouts
• the enabling of the mechanism to electrically swap the transmit and receive pairs
• the automatic detection and negotiating of MDI/MDIX operation of the port
16. Which three statements are true about the role of routers in the network? (Choose three.)
• They propagate broadcasts.
• They enlarge collision domains.
• They segment broadcast domains.
• They interconnect different network technologies.
• Each router interface requires a separate network or subnet.• They maintain a common frame format between LAN and WAN interfaces.

17. Refer to the exhibit. A network administrator has decided to use packet capture software to evaluate all traffic from the student subnet on the way to the Internet. To ensure that all packets are captured, what network device should be used to connect the monitoring station to the network between R1 and R2?
• router
• hub
• switch
• wireless access point

18. Refer to the exhibit. Assume that all devices are using default settings. How many subnets are required to address the topology that is shown?
• 1
• 3
• 4
• 5
• 7

19. Refer to the exhibit. Which three statements are true about the exhibited topology? (Choose three.)
• Hosts B and C are in the same subnet.
• Five broadcast domains are present.
• Host B is using a crossover cable to connect to the router.• Four broadcast domains are present.
• Five networks are shown.• Host B is using a rollover cable to connect to the router.

20. To establish a console connection from a computer to a Cisco router, which cable wiring option would be used?
• crossover cable
• straight through cable
• rollover cable
• V.35 cable

21. Refer to the exhibit. Which three statements identify the type of cabling that would be used in the segments that are shown? (Choose three.)
• Segment 1 uses backbone cabling.
• Segment 1 uses a patch cable.• Segment 3 uses patch cabling.
• Segment 3 uses vertical cabling.
• Segment 3 uses horizontal cabling.
• Segment 4 uses vertical cabling.
22. Refer to the exhibit. A network technician has been allocated the 192.168.1.0/24 private IP address range for use in the network that shown in the exhibit. Which subnet mask would be used to meet the host requirements for segment A of this internetwork?
• 255.255.255.128
• 255.255.255.192
• 255.255.255.224• 255.255.255.240
• 255.255.255.248

What are two common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose two.)
-->the automatic detection and negotiating of MDI/MDIX operation of the port
--> the enabling of the mechanism to electrically swap the transmit and receive pairs

Refer to the exhibit. A student is setting up a home network primarily used for extensive file transfers, streaming video, and gaming. Which network device is best suited to these types of activities in the topology shown?
wireless access point
router
hub
* switch